Custom Building Products/CustomTech
Website
Space 2339
Space 2339
Profile
From the leaders in surface prep, concrete and sub-floor preparation solutions comes a new line of products, designed for all types of floor covering.
After years of working closely with commercial contractors, Custom Building Products has developed a complete family of professional-grade solutions designed specifically to meet their stringent requirements. The CustomTech line incorporates the most advanced technology in the industry and is engineered to deliver optimum performance when used for all types of flooring preparation: carpet, resilient, wood, linoleum, vinyl, laminate and more. Because of their superior strength, durability and ease of use, CustomTech products are particularly well suited to institutional, health care and large commercial installations, delivering a level of quality contractors know they can count on.
TechPatch RPS
TechPatch RPS is a premium quality, fast setting underlayment product with exceptional handling characteristics, used for ramping, patching or screeding suitable horizontal substrates. TechPatch RPS can be installed from featheredge to 1.5 neat under most commercial and residential floor coverings.
TechLevel-HPT
TechLevel-HPT is a High Performance, Self-Leveling Topping designed
for fast-track resurfacing and smoothing of interior substrates such as
concrete, porous tile and certain non- porous surfaces when properly
prepared. TechLevel-HPT can be sealed to create a concrete wear
surface for commercial, light industrial and residential applications.
TechLevelHPT
can be installed from 1/4” to 1” in one application.
TechLevel-HPT is pourable and seeks its own level to produce a
smooth, flat, durable surface that hardens quickly and dries fast.
Custom RedGard Waterproofing and Crack Prevention Membrane
A ready-to-use elastomeric waterproofing membrane for both
commercial and residential tile and stone application. Suited for
interior and exterior substrates, RedGard® creates a continuous
waterproof membrane barrier with outstanding adhesion and reduces
crack transmission in tile and stone floors. It bonds directly to clean
metal drains, PVC, stainless steel and ABS drain assemblies and can
be used as a slab-on-grade moisture vapor barrier under all types of
floor coverings.
Custom Speed Slope
SpeedSlope® is a rapid setting, rapid hardening, polymermodified,
pre-blended, cement based mortar bed and sloping mortar for leveling
and ramping up to 3" on horizontal substrates up to 5" thick in
confined areas such as trenches. May be also used for walls and
countertops, SpeedSlope® sets to a walkable hardness within one to
two hours for installation of ceramic tile & natural stone tile flooring.
Formulated for dimensional stability and exceptional bond strength,
SpeedSlope® is ideal for presloping under waterproofing membranes
and mortar beds in shower applications, for countertops and patching.
Custom MBP
Multi-Surface Bonding Primer (MBP) is a single-component, waterbased
primer engineered to deliver superior adhesion on a variety of
substrates where proper bonding is difficult. Specially formulated with
aggregates and polymers to promote mechanical adhesion on nonporous
substrates.
TechPrime A
TechPrime A is an advanced acrylic primer and sealer that prepares
surfaces for the application of an appropriate CustomTech™ selfleveling
underlayment. It seals porous and non-porous surfaces and
improves the bond of the underlayment to the subsurface.
TechMVC
CustomTech™ TechMVC™ 100% Solids Epoxy Moisture Vapor Control
TechMVC is a true single coat, high density, moisture- and alkali-resistant, two-component, rapid cure 100% solids epoxy coating specifically formulated to control concrete moisture vapor emission and alkalinity beneath finished flooring. TechMVC may be used on concrete substrates measuring up to 100% RH (per ASTM F-2170), 25 lbs MVT (per ASTM F-1869) and pH 14, and is part of a full system to bring floors to ASTM F-710 and ASTM F 3010-13 at 8.5 mils nominal for moisture vapor compliance. Single-coat application effectively controls concrete moisture emission and creates an alkaline barrier between the substrate and adhered flooring materials. TechMVC is compatible with appropriate CustomTech™ primers, most non-porous surface primers, reactive and pressure sensitive adhesives and setting materials typically used to install adhered flooring such as: ceramic tile, vinyl composition tile (VCT), carpet, sheet vinyl, rubber and wood. Note: Some adhesives may require the use of a primer, consult Custom Technical Services.
TechMVC is compatible with most epoxy coatings (including epoxy terrazzo) and reactive urethane and epoxy adhesives for direct bond applications.
Silk Floor Patch
A fast-curing, calcium aluminate based, patching and finishing
compound that provides a smooth finish to a variety of substrates prior
to the installation of floor coverings. Formulated with Controlled Cure
Technology,™ Silk helps eliminate installation problems of bond failure,
crumbling, mildew and staining of resilient flooring due to freemoisture
found in traditional underlayments. Its rapid setting formula
allows installation of most floor coverings in as little as 30 minutes.
TechLevel XP1®
TechLevel™ XP1® is a high performance, calcium aluminate-based,
high strength, low prep, self-leveling underlayment that levels floors
prior to the installation of ceramic tile, natural stone tile, resilient
flooring, carpet, wood and other floor coverings. This quick-setting
underlayment can be applied to 2" (5 cm) thick in one pour and seeks
its own level in minutes. Formulated to have high compressive strength
and abrasion resistance, XP-1 achieves an extra heavy rating for high
impact use in food plants, hospitals, and kitchens. XP-1 may be applied
to in residential structures with floor joists up to 24" (61 cm) o.c.
Formulated using Controlled Cure Technology,™ XP1
helps eliminate
installation problems such as bond failure, crumbling and staining of
resilient flooring caused by the free moisture found in traditional
underlayments.
Key Features
Low Prep Formula Just Sweep, Prime & Pour
Abrasion Resistant - Holds up to traffic during construction
5,500 PSI Compressive Strength
Exceeds ASTM requirements for resilient floor covering installations
High flow formula has excellent handling and excellent flow retention
properties
Crack resistant
TechLevel WSF
TechLevel-WSF SLU is a high flow, fiber reinforced calcium aluminate
cement based, self-leveling underlayment that eliminates the need for
reinforcing lath over plywood and OSB on interior wood framed
subfloors. It produces a smooth, level substrate ready for the
installation of ceramic and natural stone tile, wood, carpet, and other
resilient floor coverings. Formulated with Controlled Cure
Technology™, TechLevelWSF
SLU helps eliminate installation
problems such as slow drying, bond failure, crumbling, and staining of
resilient flooring caused by the free moisture found in traditional
underlayment.
TechLevel 150
TechLevel™ 150 is a premium, calcium aluminatebased,
high quality self-leveling underlayment that achieves greater than 4300 psi
compressive strength and incorporates low-prep technology. TechLevel
150 levels floors prior to the installation of ceramic tile, natural stone
tile, resilient flooring, carpet, wood and other floor coverings. This
quick setting underlayment can be applied up to 1.5" (3.8 cm) thick in
one pour and seeks its own level in minutes. Formulated to have
excellent compressive strength, TechLevel 150 may be applied in
residential structures with floor joists up to 24" (61 cm) o.c.
Formulated using Controlled Cure Technology™, TechLevel 150 helps
eliminate installation problems such as bond failure, crumbling and
staining of resilient flooring caused by the free moisture found in
traditional underlayments.
TechLevel 125
TechLevel 125 is a high quality, self-leveling underlayment that
achieves up to 4,000 psi compressive strength. TechLevel 125 levels
floors prior to the installation of resilient flooring, carpet, wood,
ceramic tile, natural stone tile and other floor coverings. This quick
setting underlayment can be applied 1/4" to 3" (7.6cm) thick in one
pour and seeks its own level in minutes. Formulated to have excellent
physical strength, TechLevel 125 may be applied in residential
structures with floor joists up to 24" (61 cm) o.c. Formulated using
Controlled Cure Technology™, TechLevel 125 helps eliminate
installation problems such as bond failure, crumbling and staining of
resilient flooring caused by the free moisture found in traditional
underlayment.